Vol 2 No 4 (2010): Mechanics, material science, industrial engineering and management
Published: 2010-08-31
Article
Investigation into the quality of thermally treated package lamination
Abstract 395 | PDF Downloads 251 | DOI https://doi.org/10.3846/mla.2010.058
Page 5-9
Investigation into delamination
Abstract 403 | PDF Downloads 227 | DOI https://doi.org/10.3846/mla.2010.059
Page 10-12
Research on transfering the dynamic process by the spring
Abstract 432 | PDF Downloads 223 | DOI https://doi.org/10.3846/mla.2010.060
Page 13-17
The influence of formulating a damping solution on dot gain
Abstract 418 | PDF Downloads 225 | DOI https://doi.org/10.3846/mla.2010.061
Page 18-23
Adhesive analysis of painted coatings
Abstract 438 | PDF Downloads 642 | DOI https://doi.org/10.3846/mla.2010.062
Page 24-27
The methodology for calculating book backbones
Abstract 408 | PDF Downloads 424 | DOI https://doi.org/10.3846/mla.2010.063
Page 28-30
Research on the influence of orthopaedic inserts on pressure distribution in the foot
Abstract 437 | PDF Downloads 475 | DOI https://doi.org/10.3846/mla.2010.064
Page 31-34
Research of human postural balance parameters
Abstract 418 | PDF Downloads 666 | DOI https://doi.org/10.3846/mla.2010.065
Page 35-38
About the possibility of using ultrasound in thermal spray technologies
Abstract 377 | PDF Downloads 272 | DOI https://doi.org/10.3846/mla.2010.066
Page 39-41
Research on the efficiency of side exhausters
Abstract 388 | PDF Downloads 258 | DOI https://doi.org/10.3846/mla.2010.067
Page 42-45
Review of devices for measuring angles and prospects for development
Abstract 387 | PDF Downloads 346 | DOI https://doi.org/10.3846/mla.2010.068
Page 46-49
Research on the efficiency of drinking water aeration systems
Abstract 452 | PDF Downloads 236 | DOI https://doi.org/10.3846/mla.2010.069
Page 50-52
The impact of the welded joints made of X8CrNiTi18–10 stainless steel on the reliability estimation of pipes
Abstract 447 | PDF Downloads 253 | DOI https://doi.org/10.3846/mla.2010.070
Page 53-58
Sorting plastic waste in hydrocyclone
Abstract 523 | PDF Downloads 294 | DOI https://doi.org/10.3846/mla.2010.071
Page 59-61
Protection of intellectual property in pharmaceutical industry
Abstract 471 | PDF Downloads 277 | DOI https://doi.org/10.3846/mla.2010.072
Page 62-64
The research of influence of vibromechanical treatment on ni coatings PT-19N-01 adhesion
Abstract 411 | PDF Downloads 199 | DOI https://doi.org/10.3846/mla.2010.073
Page 65-68
Methods of forecasting in foreign exchange market
Abstract 498 | PDF Downloads 413 | DOI https://doi.org/10.3846/mla.2010.074
Page 69-72
Research on the mechanical properties of the weld seams of constructional steel using vibration energy method during welding
Abstract 456 | PDF Downloads 504 | DOI https://doi.org/10.3846/mla.2010.075
Page 73-76
Methodical aspects of creativity stimulation for the purposes of innovation development
Abstract 454 | PDF Downloads 884 | DOI https://doi.org/10.3846/mla.2010.076
Page 77-82
Research on cutting the plasma of aluminium alloys
Abstract 447 | PDF Downloads 292 | DOI https://doi.org/10.3846/mla.2010.077
Page 83-87
The influence of feed rate on surface roughness of TIC–WC carbide and Al2O3 ceramics SAWN-OFF with inner edge of diamond disc
Abstract 427 | PDF Downloads 221 | DOI https://doi.org/10.3846/mla.2010.078
Page 88-90
Research of defects in spur gear
Abstract 380 | PDF Downloads 317 | DOI https://doi.org/10.3846/mla.2010.079
Page 91-94
Research on the time-dependent adaptation of arterial blood pressure considering load value
Abstract 379 | PDF Downloads 271 | DOI https://doi.org/10.3846/mla.2010.080
Page 95-97
A case study on improving the process of decision making in industrial companies
Abstract 471 | PDF Downloads 432 | DOI https://doi.org/10.3846/mla.2010.081
Page 98-102
Typical lexical and syntactical mistakes in technical treatises
Abstract 398 | PDF Downloads 5829 | DOI https://doi.org/10.3846/mla.2010.082
Page 103-106