Institute of Geodesy and Mine Surveying, Faculty of Mining and Geology, VSB – Technical University of Ostrava, 17.listopadu 15, CZ 708 33 Ostrava, Czech Republic
Institute of Geodesy and Mine Surveying, Faculty of Mining and Geology, VSB – Technical University of Ostrava, 17.listopadu 15, CZ 708 33 Ostrava, Czech Republic
Institute of Geodesy and Mine Surveying, Faculty of Mining and Geology, VSB – Technical University of Ostrava, 17.listopadu 15, CZ 708 33 Ostrava, Czech Republic
Institute of Geodesy and Mine Surveying, Faculty of Mining and Geology, VSB – Technical University of Ostrava, 17.listopadu 15, CZ 708 33 Ostrava, Czech Republic
The purpose of depth measurement is to bring the altitude from the surface to the connected horizon (level) by means of a vertical mine. Points, for which the height is determined in this way, are part of the fundamental mining vertical control, and their height should therefore be determined as accurately as possible. There are several ways of this measurement and the temperature has influence on accuracy of each of them. The paper is dedicated to evaluation of influence of temperature, applying results of height connection measurement carried out at Karvina mine. Two measurements were performed in ČSA 2 shaft and the other in shaft Mir 5 of Darkov mine in Ostrava-Karvina Coal District, CZE. Height connection measurement by a vertical mining work was done in two ways: using the depth tape and using the electro-optical distance meter.
Mučkova, J., Dandoš, R., Jadviščok, P., & Konečny, M. (2016). Influence of temperature on accuracy of height connection measurement. Geodesy and Cartography, 42(1), 16-19. https://doi.org/10.3846/20296991.2015.1160494
Authors who publish with this journal agree to the following terms
that this article contains no violation of any existing copyright or other third party right or any material of a libelous, confidential, or otherwise unlawful nature, and that I will indemnify and keep indemnified the Editor and THE PUBLISHER against all claims and expenses (including legal costs and expenses) arising from any breach of this warranty and the other warranties on my behalf in this agreement;
that I have obtained permission for and acknowledged the source of any illustrations, diagrams or other material included in the article of which I am not the copyright owner.
on behalf of any co-authors, I agree to this work being published in Geodesy and Cartography as Open Access, and licenced under a Creative Commons Licence, 4.0 https://creativecommons.org/licenses/by/4.0/legalcode. This licence allows for the fullest distribution and re-use of the work for the benefit of scholarly information.
For authors that are not copyright owners in the work (for example government employees), please contact VILNIUS TECH to make alternative agreements.